Operator`s manual

SECTION 3 SETUP AND OPERATION

ADJUSTING PEELER PLATE TO CONTAINER

The peeler plate of the applicator needs to be adjusted square to the

conveyor in both the flow direction as well as across the conveyor. To adjust

in the flow direction, there is a knob under the applicator. Turning the knob

clockwise will cause the applicator to tip forward. Turning the knob counter

clockwise will cause the applicator to tip backwards. (See Fig.3 & 3a)

To adjust across the conveyor, there is a knob in front of the applicator.

Turning the knob clockwise will cause the applicator to tip inward. Turning the

knob counter clockwise will cause the applicator to tip outward.

(See Fig.4 & 4a)

Fig.3

Knob

Square Peeler Plate

Fig.4

Knob Applicator

Fig.3a

Conveyor

Fig.4a

Conveyor