Operator`s manual

15
ADJUSTING PRODUCT SPACER
The Product spacer meters the spacing between the containers that are being
labeled. The diameter of the container and the label length is what determines
the spacing. If you have a 3” diameter container and a 1” long label, the spacing
in between the containers would be shorter than if you had a 3” diameter
container and a 9-1/2” long label for a total wrap. With power off, place a
container in front of the product spacer and adjust until the container will not go
past. (See Fig.12) To adjust Product Spacer across conveyor, use ratchet handle
under Product Spacer Wheel. To adjust Product Spacer up or down, use ratchet
handle that attaches the unit to the conveyor. (See Fig.13)
Fig.12
Product Spacer
Fig. 13
Cross
Adjust
Height
Adjust
Cork in front of
Product Spacer