Operator`s manual

SECTION 1 OVERVIEW

INTRODUCTION

Thank you for purchasing the R-320 Automatic round product labeling system.

The R-320 is known for high quality and operating convenience. The R-320

features heavy-duty steel framework with casters and leveling pads, L-15 label

applicator, variable speed components, photoelectric product sensor and easy

access control enclosure. The applicator is at the heart of every labeling

operation. The L-15 is a mid-range wipe-on label applicator with speeds up to

1200 inches per minute. The clutch/brake operated machine is a low

maintenance unit, featuring analog controls and digital label sensing, built into a

durable labeling workhorse.

The variable speed applicator has advanced features for label dispensing and

label placement. First, the L-15 has an “on delay,” controlling the timing of the

label dispense with regards to the signal from a product sensor. The applicator

also features an “off delay,” controlling the labels stop position with relation to the

peeler plate.

The R-320 has no pneumatics requiring electricity only (120VAC 60Hz ±10%),

and can handle label web widths up to 6 ½ inches. The R-320 can also handle

label rolls up to 12 inches in diameter on a 3”core.

With proper maintenance the R-320 will provide many years of dependable and

trouble free service. We wish you much success with this product and will

always welcome any suggestions you may have, as to how we may improve our

products. Read this manual and familiarize yourself with the machine before

using this equipment.