Operator`s manual

CONTROLS AND THEIR FUNCTIONS

L-15 FRONT PANEL

1. Main Switch: Supplies power to the machine. The main switch "On"

also supplies power to the hot stamp coder outlet. Therefore, the coder

can be pre-heated without running the motor.

2. Fuse: 3 amps. 5 amp with coder

3. Off Delay: Turn knob clockwise to provide up to one-second delay of

label detection. Works with photoelectric label sensing.

4. On Delay: Turn the knob clockwise to provide up to a one second

delay before label application.

5. Label sensor Outlet: 4 Pin Female amphenol. 4 Pin male amphenol

is attached to label sensor.

6. Hot Stamp Coder Outlet: 5 Pin Female amphenol. 5 Pin male

amphenol is attached to the hot stamp imprinter head.

7. Product Detection Outlet: 6 Pin Female amphenol. 6 Pin male

amphenol is attached to the photoelectric product sensor.

8. Motor Switch: Supplies power to the motor. Turn this switch OFF

when setting product sensor to prevent labels from dispensing.

9. Jog Switch: Dispenses one label when depressed.

5 6 7 8

Fig.2