Instruction manual

4509/4510,4512
LUBRICATION & FUNCTION ChECK
Warning:
Turn oft' slicer and DISCONNECT ELECTRICAL CORD before
lubricating. Leave protective guard (Fig. i [4]) in place.
General lubrication should be performed in accordance with the lubrication instructions in
Fig. 2. During this lubrication sequence, be sure to check for free operation and movement
of related parts as well as for excessive wear and looseness of various parts. Be sure to
check all handles and knobs for tightness.
LUBRICATION
FIGURE 2
A -Apply Petro-Gel (4400408) often as required to maintain light film.
B - Clean and apply mineral oil weekly
Page 7
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor