- Craftsman Electric Blower Operator's Manual

twigs,andbitsofpaper.Donotvacu-
um stones, gravel, metal, broken
glass,etc.,toavoidseveredama_.eto
theimpeller.Toavoidthepossibilityof
electricalshock,donotattempttovac-
uumwateror otherli.q.wids._- --
• Never run the unitwithout the proper
equipmentattached. When used as a
vacuum, always installvacuum tubes
and collection bag assembly. Make
sure the collection bag assembly is
completely zipped when unit is run-
ning to avoid flying debds. Use only
recommended attachments.
• Avoid situations which could set the
collectionbag on rire. Do notvacuum
discardedmatches,cigars, cigarettes,
or ash from fireplaces, barbecue pits,
brush piles, etc. To avoid spreading
tire, do not use blower near leaf or
brushrims, rimplaces, barbecue pits,
ashtrays, etc.
• Always use the collection bag shoul-
der _ when vacuuming to avoid
lossof control.
• Check air intake openings, elbow
tube, and vacuumtubes frequently,al-
ways with the unit stopped and the
power source disconnected. Keep
vantsandtubesfree fromdebriswhlch
can accumulateand restrictproperair
flow. Do not use with any opening
blocked,.Keepfreefrom dust,lint,hmr
and anyth,ngthat may reduceair flow.
STANDARDS
This productislisted by Underwriters
Laboratorias,Inc. in accordancewith
UL Standard 1017.
If situationsoccurwhichare not cov-
ered in th_ manual, use cam and
goodjudgement. If you need assis-
tance, contact your Sears Service
Center or call 1-800-235-5878. Failure
to followall Safety Rulesand Precau-
tions can result insedous injury.
SAVE THESE INSTRUCTIONS
CARTON CONTENTS
Model 358.799370
Blower
BlowerTube
Cord Lock
Examine partsfor damage. Do notuse
damaged parts.
NOTE: If you need assistance or find
that parts are missing or damaged, call
1-800-235-5878.
ASSEMBLY
WARNING: If received assembled,
. repea_,all steps to ensure your unitis
propeily"-assembledand all fasteners
are secure.
ASSEMBLY INSTRUCTIONS FOR
USING YOUR UNIT AS A BLOWER
NOTE: ,Assembly instructions for using
your unR as a vacuum follow this sec-
tion.
ATTACHING THE BLOWER TUBE
AND NOZZLE
If you have already assembled your
unitfor use as a vacuum, remove the
vacuumtubes and the collection bag.
• Insertthe blowertube intothe blower
outieL
• Twistthe blowertube cJockwiseuntil
it is firmlyseated in the blower outieL
Make sure the nozzle pointsupward.
BlowerOutlet /
BlowerTube