Manual

“ROTANTE” pizza oven
R-002 100218
Page 31 of 43
8.3.2 Automatic operating mode.
It is enabled with PI TOUCH key burner-sheated element from the STANDBY page.
1
Graphic key selects the Automatic mode: icon is displayed on
the top right corner of the status display. With the function keys + and –
the operator sets the desired temperature level for the baking chamber.
The flames displayed at the top of the screen will be green. With this
mode on, the temperature control is enabled and the flame will
automatically be managed by the system to reach and maintain the
requested temperature.
Keeping + or – function key pressed for more than 2 seconds will increse
the variation speed.
Activates or deactivates the deck's heating sheated element (the
status conditions is shown on the display). Check the sheated element
control chapter for more information
With the graphic key EXIT the STANDBY page is shown.
8.3.3 Sheated element control and setup
It is enabled with PI TOUCH key burner-sheated element from the STANDBY page.
1
From the STANDBY page TOUCH key burner-sheated element