Manual

“ROTANTE” pizza oven
R-002 100218
Page 35 of 43
9. Setting parameters for the oven's general configuration.
The control electronics allows the user to customize all the oven's operating parameters.
During the configuration phase, the oven keeps the preceding operating
status. Unless otherwise specified, the configured changes are immediately
active.
Access to configuration logs is enabled from the STANDBY page with PM (keep the button
pressed) of the function key [+].
In this condition it is possible to scroll through the parameters you want to change using
the keys [+] and [-].
For the ease of operation, the display shows information with lines of different colors
associated with different functions:
GRAY
The line with a gray colored background shows some information about the
oven's operating status and these cannot be modified until selected by the
operator.
GREEN
Line with a green colored background. The parameter shown on the display can
be changed by the operator. By touching the line, the background's color will
change from green to white, the operator can change the parameter indicated in
the area with a red colored background.
WHITE
The line with a white colored background allows the operator to make changes.
RED
Areas with a red background - parameter can be modified.
The setting modes are described here below.
Home screen
Identification number of the line
associated with the single parameter to
be set.
Editable parameter.
Selected line (in green) - by pressing it
the background color will change to
white, the stored parameter can be
changed using the function keys +/-, the
OK key ends the modification process,
otherwise use the CANCEL key to exit
the setting (without making any change).
Non editable
parameter (until selected).