Manual

“ROTANTE” pizza oven
R-002 100218
Page 17 of 43
Tighten firmly all the parts of
the standing support.
Once the standing support
has been mounted, position
the structure in the area
where the oven will be
installed.
The red panel shows the
side where the oven's door
will be positioned.
Load the oven's body
inserting the forks as shown
in the figure (see green
rectangles, close to the
oven's standing feet).
The incorrect
positioning of the
forks can severely
damage the
equipment.
DO NOT insert the forks in
the area marked as red in
the figure above.
After reaching the
installation position, lift the
oven up to a working height
for the correct positioning on
the standing support.
Align the standing support's
verticals under the oven's
standing feet with simple
manual operations.
Lower the oven till it lays
completely on the standing
support's verticals.
Standing feet