Manual

“ROTANTE” pizza oven
R-002 100218
Page 36 of 43
#fn
01
Time control of the BAKING 1 cycle (from 0.1 sec. to 99 minutes and 59 sec.)
02
Speed control of the baking deck rotation during the BAKING 1 cycle (from 0.5 to 5.5
rounds per minute) in RPM
03
Speed control of the baking deck rotation during the PROGRAM COMPLETE
BAKING 1 phase (from 0.5 to 5.5 rounds per minute) in RPM
04
Flame level control during the BAKING 1 cycle (range 1-5)
05
Time control of the BAKING 2 cycle (from 0.1 sec. to 99 minutes and 59 sec.)
06
Speed control of the baking deck rotation during the BAKING 2 cycle (from 0.5 to 5.5
rounds per minute) in RPM
07
Speed control of the baking deck rotation during the PROGRAM COMPLETE
BAKING 2 phase (from 0.5 to 5.5 rounds per minute) in RPM
08
Flame level control during the BAKING 2 cycle (range 1-5)
09
Speed control of the baking deck rotation when in STANDBY MODE
10
Time control for the PROGRAM COMPLETE phase (range 0,1 sec. to 99 minutes
and 59 sec.)
11
Setting the rotation direction of the baking deck: clockwise or counterclockwise
NOTE: The changes will take place only after the deck has been stopped and
restarted with PI STOP ON-OFF button
12
Temperature display setting in Celsius or Fahrenheit scale.
13
Language setting for the displayed texts (Italian – English – etc.)
14
Remote controls pairing (max. 3). Select a position from 1 to 3 and press on the
screen. Press any button on the remote control to complete the pairing procedure
15
Firmware UPDATE function. Operation conducted using a USB pen drive and
following the information shown on the display. Insert USB key containing the fw
update file in the slot, prior to selecting this option
16
Auto-control setting for the burner's flame minimum level (flame 1). The wizard is
launched. This function can only control the levels managed by the MODUPLUS®
within the ranges mechanically set. To change minimum and maximum levels refere
to paragraph 7.4.1 - Setting minimum / maximum gas levels
If the wizard stops before completing the operation, the previously recorded setting
will be restored.
17
Oven internal light mode:
 On
 Off
18
Factory setup: remote guided assistance will be needed in order to access this
menu. +39(0)30.9972249 to call the technical support center. Only an authorized
Univex operator can ask you to modify the parameters within this menu.