Instruction manual

8512
ARM ASSEMBLY
Figure 4
ILLUS. NO. PART NO. DESCRIPTION QTY.
1. 7510038 RUBBER SHOCK ABSORBER 2
2. 8512314 SPRING, DAMPER 1
3. 8512313 SCREW, SOC HD CAP M8-1.25 X 30MM 2
4. 8512312 ROD, ROUND GUIDE 1
5.* 8512301 BUSHING 2
6. 8512300 ARM SUPPORT 1
7. 8512316 BAR, FRAME 1
8. 8512318 WASHER, EXTERNAL TOOTH 2
9. 8512317 SCREW 2
10. 6509033 NUT, JAM M10-1.5 1
11. 6509032 STUD, BUSHING ADJUSTMENT 1
12. 8512308 BOLT, BEARING LOCKING 1
13. 6509031 BEARING 1
14. 6509028 WASHER, M8 1
15. 6509042 STUD, ARM ATTACHMENT 1
16. 8512319 CARRIAGE ARM 1
17. 6509044 KNOB, CARRIAGE ARM 1
18. 6509045 HANDLE, CARRIAGE ARM 1
19. 6509046 SCREW, HEX HD WASHER M6-1.0 X 15MM 2
20. 8512325 CARRIAGE ANCHOR 1
21. 8512326 STUD, CARRIAGE ANCHOR 1
22. 1200377 OIL CUP AS REQ
23. WASHER 4
24. SPRING, DAMPER 1
* 8512301 PART OF ILLUS NO. 6, CAN NOT BE PURCHASED
Page 16