OPERATION MANUAL BOWL LIFTER Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet No. ESA913.
1. Safe work methods and procedures ................................................................................................. 4 1.1. Risks for the operator ........................................................................................................................ 4 2. Machine description ............................................................................................................................ 6 3. Machine identification ............................................
Welcome to Univex Thank you for purchasing this Univex Product. Your new VE 160-200-250-300 spiral mixer has been designed with advanced performance and safety features that make it an excellent addition to your food preparation equipment. Like all Univex mixers, slicers, meat grinders and accessories, this lifter is engineered to provide years of reliable service.
1. Safe work methods and procedures READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE In order to prevent hazardous conditions and/or possible injuries caused by: electric current, mechanical parts, fire, or of hygienic nature, the following safety warnings must be observed: Keep your work station tidy. Clutter can cause accidents. Assess the environmental conditions.
Earthing obligation Prohibition to clean and lubricate moving parts Prohibition to remove the safety devices and guards ATTENTION! Wear the provided PPE during operation (e.g. shoes with reinforced tip, gloves, goggles and masks). Clean the machine thoroughly after use. Do not remove the safety devices or protective casings. Do not put any objects through the bowl guard with the parts in motion. Before any maneuvers wait for the machine to completely stop, turn it off and disconnect it from the mains.
2. Machine description MACHINE DESCRIPTION AND USE: The machine called MACISTE LIFTER is an electromechanically controlled equipment suited to lifting BOWL TROLLEYS for bread-making machines that contain up to 250 kg of dough with an overall weight of 400 kg. Any other use that is not expressly authorized and provided for violates the design and voids the safety requirements.
3. Machine identification There is a plate on the machine casing, like the one illustrated, which carries indications concerning the manufacturer, type of machine, serial number, electrical features, frequency, rated power, number of phases, year of manufacture and mass. 3.1. Main components Raw materials used: the machine is almost completely made of food safe steel, aluminum, cast iron, rubber, nylon, polyester and polyethylene.
4. Technical data and features 4.1. Technical data, dimensions, packaging and lifting. 4.1.1. Technical data MODEL MACHINE MASS [kg] POWER [kW] CONSUMPTION [kW] CAPACITY [kg] ELECTRICAL POWER SUPPLY MACISTE 1300 480 2.2 2.2 400 400V 60Hz 3 phases + PE MACISTE 1600 500 2.2 2.2 400 400V 60Hz 3 phases + PE MACISTE 1900 540 2.2 2.2 400 400V 60Hz 3 phases + PE MACISTE 2700 560 2.2 2.2 400 400V 60Hz 3 phases + PE 4.1.2.
4.1.3. Packaging MODEL A B H MACISTE 1300 1700mm 1300mm 1700mm MACISTE 1600 2000mm 1300mm 1700mm MACISTE 1900 2400mm 1200mm 1700mm MACISTE 2700 3200mm 1250mm 1700mm 4.2. Control panel 1) MASTER SWITCH 2) EMERGENCY BUTTON 3) INTERNAL MACHINE UP AND DOWN BUTTON Operation manual Pag.
5. Transport and installation 5.1.1. Machine on pallet Make sure that the lifting means complies with the load. Widen the lifting forks as much as possible and make sure they stick out from the pallet. Work in an area free from persons and animals. During movement, always keep the load as close to the ground as possible. Use the required P.P.E. MACISTE 1300/1600/1900 MACISTE 2700 Operation manual Pag.
5.1.2. Machine without pallet To remove the machine from the pallet, lift it as shown in the figure below, with appropriately robust straps. Make sure the lifting equipment is adequate for the load. Work in an empty area. During movement, always keep the load as close to the ground as possible. Use the required P.P.E. (e.g. shoes with reinforced tip and non-slip sole, gloves and helmet). During lifting the machine may be slightly tilted (10-15 degrees) MACISTE 1300/1600/1900 Operation manual Pag.
MACISTE 2700 1) HOLES FOR EYELETS: insert the eyelet in the specific hole 2) FASCIA: STRAP: pass through the eyelet (N.B.: one per side). Once lifted - pay ATTENTION to imbalances rotate it horizontally, with the legs on the ground. 3) IMPORTANT: the control unit cap which is sealed MUST be replaced with the attached bleed cap. 4) REMOVING STOPS: when the machine is horizontal, remove the stops before activating the machine. Operation manual Pag.
5.2. Description of the adjustment and commissioning operations 5.2.1. Installation The machine must be positioned vertically on a smooth surface and able to support the weight (floor with resistance above 20 kgcm 2). The walls and the floor must be in good condition and easy to clean. If there is a risk of overturning, anchor the machine to the floor using 4 wedges or bolts with tensile strength greater than 300 kg.
6. Clearing and maintenance 6.1. Machine cleaning Always keep the machine clean to prevent the formation of micro-organism colonies that can alter the end product and be harmful to health. It is also important that flour does not deposit on moving parts, thus creating annoying squeaks and abnormal wear. Cleaning: the machine is not spray-proof; it must not be cleaned with running water or compressed air, to minimize dust movement.
Warranty The Univex spiral mixer carries a One-Year, on-site, parts and labor warranty against any defects in materials or workmanship. The one-year period begins on the date of purchase by the end user and remains in full effect provided the unit is used properly and in accordance with our operator’s manual. Any work to be performed under this warranty must be performed between the hours of 8:00 a.m. and 5:00 p.m. local time, Monday through Friday. Univex will not cover overtime charges of any kind.
