Manual

3 of 9
SAFETY INSTRUCTIONS
Safe and systematic use of the machine is subject to the respect of the below listed behaviours and
regulations.
Safety rules
 Personnel has to be in good physical condition, mental condition, and properly trained to use the
spiral mixer machine by reading this manual.
 The person in charge of the company safety, operations or department, in choosing the worker to be
assigned to the equipment should consider the cultural level, the physical fitness and the
psychological aspect (mental equilibrium, sense of responsibility, etc.). The worker needs to be
provided with a training, in addition to reading this manual, in order to supply a complete working
knowledge of the machine and proper care of the machine prior to and after each use.
 The space around the machine has to be well lit, sufficient for access to controls, sufficient area for
adding ingredients and clean/clear of any/all obstructions.
 Do not wear loose/hanging clothes or floating strips (ties, napkins, torn clothes, open jackets, etc), to
avoid the risk of getting caught in the moving parts of the machine when is use..
 During maintenance and cleaning phases, the worker has to turn the Main Power Switch (locted on
the left hand side of the machine) and make the equipment safe (e.g. removing the plug).
 During the running phase, don’t leave the machine unattended, pay attention to noises or anomalous
behaviours and stay away from rotary parts.
 At the end of the work, turn off the Mains Power Switch, make the machine safe and clean it with a
neutral degreasing.
Safety devices
The machine is provided with some devices that protect its running and the worker safety; they must not be
removed or modified and their running has to be periodically controlled.
 Mains Power Switch:
Cuts the power off to maintain the m
achine in safe conditions.
 Inverte
r power block: Cuts off the power in case of extreme charge of the electrical motor (only with
inverter)
 Thermic sw
itch: Cuts the power off in case the e
lectric motor gets overheated.
 Fix pr
otections: All cases and protections fixed by screws or mechanical
blocks can be removed only
for maintena
nce, by skilled personnel and in prescribed conditions.
 Mobile protections: The mobile cases must be correctly placed or the machine cannot be used.
If these conditions are missed, the machine doesn’t work.