Manual

7 of 9
► Timer - Timer setting for first speed operation.
►► Timer - Timer setting for second speed operation.
Emergency Timer Selector Bypass Key Switch - This switch has three (3) operational positions;
• Normal (center, clock face postion) which operates with the timer sequences. In this
position, the key can be removed.
• Clockwise (►) position bypasses the first speed timer. In this postion, the key
cannot be removed.
• Counterclockwise (►►) position bypasses the second speed timer. In this position
the key cannot be removed.
Reverse Bowl - This momentary switch is used to reverse the direction of the bowl for short periods of time.
The switch must be held in order to activate the bowl reversal. It is not recommended to hold
the switch for periods greater than fifteen (15) seconds at a time. This switch should be used
to assist in the initial mixing of ingredients and to ssist in moving the dough mixture away
from the spiral at the completion of the mixing.
OPERATOR INSTRUCTIONS
Make sure the bowl and spiral are clean and free of any/all dirt, debris or old mixtures. Turn the Mains
Power Switch on (left side of the machine). Add the ingredients to be mixed into the bowl. Close the bowl
guard and set the timer(s) for the time necessary for the mixture for either single or dual speed operation.
Set the timer by turning the dial to the number of minutes desired (first [single arrow] and second [double
arrow]). Digital readouts on the timer will indicate the selected time(s) for each speed. If first speed is only
going to be used, do not set any time for the second speed. If only second speed will be used, do not set
any time for first speed.
Once the timer(s) are set, press the start button to begin mixing. Once the specified time(s) have expired,
the unit will shut off automatically. Lift the bowl and remove the dough mixture. Use of a plastic spatula may
help in removing the dough. Do not use metal scrapers or utensils to remove the dough as they will damage
the finish to the bowl.
Use of the Emergency Timer Selector Bypass should be used only under strict supervision. The use of the
Bypass will operate the mixer in the selected speed for an indefinite period of time. It is suggested that
person(s) of authority should remove the key when the machine is being operated under normal use. The
keyed bypass should only be used when the timer controls become inoperable. A separate timer (operator
supplied) will need to be used to make sure the machine is only operated within the specified recipe
timeframe. Once the specified time has expired, press the Stop button to stop the mixing operation.
Use of the Reverse Bowl Selector is used to initially assist in mixing the ingredients. The switch is a
momentary operation meaning that it must be held in order to reverse the rotation. Releasing the switch will
allow the bowl to rotate in its normal direction. The switch is not intended to be operated for longer than 15
seconds at a time.
The start sw
itch can also be used to “jog” / rotate the finished dough product away from the spiral for ease of
removal with the lid open.
Do not attempt to lift the bowl guard to add ingredients as this will shut the machine down. The bowl guard
incorporates a safety switch to ensure that contact with the moving spiral is minimized. This switch should
not be compromised in any way!