Operation Manual
99
New Balance
The amount closed by NB key. Includes tax and percentage calculations if tax and percentage are calculated by
NB key on closing. This amount does not reset to zero after the temporarily closed transactions are
finally closed by a media key.
Previous Balance Plus
The count and amount are the accumulation of previous positive balances that were picked up when an
Item Track was opened and the amount was entered by PB+ key.
Previous Balance Minus
The count and amount are the accumulation of previous negative balances that were picked up when an
Item Track was opened and the amount was entered by PB- key.
Net Charge
Net charge shows the total amount of all non-closed transactions. It is calculated from the new and
previous balances.
Charge (for Amount Track System) --- option
The amount closed by CHARGE key during Amount Track operations. This amount does not reset to
zero after the Amount Track is finally closed by a media key.
Previous Charge Plus (for Amount Track System) --- option
The count and amount are the accumulation of previous positive charges that were picked up when an
Amount Track was opened.
Previous Charge Minus (for Amount Track System) --- option
The count and amount are the accumulation of previous negative charges that were picked up when an
Amount Track was opened.
Net Charge (for Amount Track System) --- option
Net charge shows the total amount of all non-closed Amount Tracks. It is calculated from the charge and
the previous charges.
Grand Total
Grand Total 1 can be reset by issuing the Z-07 or Z-01 report.
Grand Total 2 is the accumulated grand total.
Grand Total X is the grand total of training transactions.
Neither Grand Total 2 nor Training Grand Total can be reset. If programmed, grand total is calculated as
each PLU amount, % amount, plus amount, discount amount and tax amount.
Report Count
There are three kinds of report counts: X (read only), Z1 (1st level and reset) and Z2 (2nd level and reset).
Each Z count will be increased only when a Z-01/Z-02 report is issued or when any Z report is issued,
depending on programming.