Operation Manual

8
3. Clerk Interrupt System
When the clerk interrupt system is used on the ECR and a clerk is doing registrations, another clerk
may interrupt the clerk. The interrupted clerk's registration contents are stored in his/her clerk's
memory and he/she is automatically signed off. The stored contents are restored by his/her clerk sign-
on operation and he/she can continue the registrations.
There are following cases in which a clerk's transaction is automatically stored in his/her memory;
- the same Hard Clerk key, Clerk Code, Clerk Card are entered
(clerk insert key can not be used)
- the sign-off operation is performed
- other clerk interrupts
- STORAGE key or NB (New Balance) key is pressed
- by the automatic storage timer
Note that the receipt will not be printed until the clerk's transaction is closed finally by a media (total)
key. Instead of the receipt issue, Item Confirmation Receipt without tax data is issued to check a
temporarily stored registration contents.
< Item Confirmation >
This is available only when clerk's transaction is stored and if permitted by programming.
To issue item confirmation, perform the operation below after the transaction is stored;
BUFFER
PRINT
---
BUFFER
PRINT
prints stored contents of the last clerk
BUFFER
PRINT
---
HARD
CLERK
1 ~ 15
prints stored contents of the specified clerk
BUFFER
PRINT
---
CLERK
ID
--- clerk code ---
CLERK
ID
prints stored contents of the specified clerk
BUFFER
PRINT
--- prints stored contents of the specified clerk
Notes.
- Item Confirmation will not include tax data.
- If an item confirmation is attempted for a clerk with zero balance, press CL key in order to reactivate the
keyboard.
- If ECR is programmed for the slip printer, Item Confirmation is printed on the slip printer. If it is required
on a receipt, press SLIP OFF key first, then perform Item Confirmation operation.
CARD