Operation Manual

114
POWER OFF / BUSY / COMMUNICATION ERROR AT SLAVE ECR
For X-report data, the master ECR prints consolidated X report skipping power offed or busy slave
ECR. See IRC status printed at the end of the report for non-consolidated slave ECRs.
When collecting Z-report data and one or more of the slave ECRs are not ready, the master ECR
displays slave ECR status as shown above. Re-attempt to collect the slave's report or skip it.
TTL 25 key for re-attempt:
If you wish to include an ECR's data on Z-report, close the transaction in process on that particular
slave, or turn its power on and then press TTL 25 key on the master ECR.
CL key for skip:
If you do not wish an ECR's data on the report, press CL key and the master will skip that slave ECR.
Master resumes data collection for the next ECR in the system.
POWER OFF AT MASTER ECR
If the power fails while collecting X-report data, the master prints consolidated X report when the
power returns. See IRC status printed at the end of the report for non-consolidated slave ECRs.
If the power fails while collecting Z-report data, the master ECR displays the machine number of the
slave ECR when the power returns. Press CL key to skip or press TTL 25 key to re-attempt.