Operation Manual

18
j) PLU Modifier
By using three modifier keys, this function can be changed from one PLU to three different PLUs. Each
modifier key is given a 3-digit modifier value (left one digit shows value and right two show number of digit).
For example, modifier value 1 is set at 105,
modifier value 2 is set at 205,
modifier value 3 is set at 305,
Then MODIFY 1 key places the fifth digit with a value of '1' to the PLU code.
PLU code 1001 is modified to PLU code 11001.
MODIFY 2 key places the fifth digit with a value of '2' to the PLU code.
PLU code 1001 is modified to PLU code 21001.
MODIFY 3 key places the fifth digit with a value of '3' to the PLU code.
PLU code 1001 is modified to PLU code 31001
Bar Coded PLUs:
turn to X position,
if required
---
PLU
MODIFY
--- scan the PLU
Hard PLUs:
turn to X position,
if required
---
PLU
MODIFY
---
turn to R position,
if required
---
HARD
PLU
PLU
Coded PLUs:
turn to X position,
if required
---
PLU
MODIFY
---
turn to R position,
if required
--- enter PLU code ---
REPEAT
The following PLU codes are set;
1001:
11001:
21001:
31001:
SODA <S> 0.60
SODA <M> 0.95
SODA <L> 1.25
SODA <LL> 1.50
KEY ENTRY
DISPLAY RECEIPT
SODA
SODA <S>
0.60
MODIFY 1 -- a
SODA
SODA <M>
, 0.95
SODA <S> 0.60
SODA <M> 0.95
SODA <L> 1.25
SODA <LL> 1.50
MODIFY 2 -- b
SODA
SODA <L>
, 1.25
MODIFY 3 -- c
SODA
SODA <LL>
, 1.50
a: Comma ", " is lit on the above REG lamp.
b: Comma ", " is lit on the above 2nd PRICE lamp.
c: Comma ", " is lit on the above 2nd MENU lamp.
Notes:
- To exit from the PLU modifier mode, press the same modifier key again.
- To change the value, press another modifier key.
- Depending on programming, this modifier value remains for one registration, for one transaction or until the
next PLU MODIFY key is pressed.