Operation Manual

19
k) Single Item
A PLU programmed as a single item closes automatically the transaction by a programmed total key. This
function is especially useful for the bar.
There are two types of single item transactions as follows;
Single-item 1: This can be used as normal registration with other non-single items and will not automatically
close the transaction.
--- enter the non-single item --- enter the single-item 1 --- can be continued ---
Single-item 2: This can be used with non-single items but will automatically close the transaction.
--- enter the non-single item --- enter the single-item 2 --- closed automatically
Single-item 1 = BEER
Single-item 2 = MARTINI
Non-single item = SANDWICH
KEY ENTRY RECEIPT KEY ENTRY RECEIPT
BEER
BEER 2.50
CASH 2.50
MARTINI
MARTINI 4.50
CASH 4.50
Closed automatically Closed automatically
KEY ENTRY RECEIPT KEY ENTRY RECEIPT
SANDWICH
BEER
SANDWICH 3.00
BEER 2.50
SANDWICH
MARTINI
SANDWICH 3.00
MARTINI 4.50
CASH 7 .50
Not closed Closed automatically
SINGLE ITEM COMBINATION FOR A PLU WITH LINK PLU
PROGRAMMED AS TRANSACTION WILL BE
Main PLU:
Link PLU:
single-item 1 or 2
non-single item or single-item 1 or 2
Only the main PLU is registered and closed automatically.
The link PLU is not registered.
Main PLU:
Link PLU:
non-single item
single-item 1 or 2
Both PLUs are registered and not closed if link PLU is single-item 1.
If link PLU is single-item 2, it is closed automatically.
When a PLU and link PLU programmed as single items are entered with other non-single items, the transaction
is either closed or not closed depending on the selection of single-item 1 (can be continued) or single-item 2
(closed automatically).