Operation Manual

7. Media Closing

Up to 25 different media (total) keys may be used to close a transaction. In addition to these media

keys, there are 10 preset tender keys that close a transaction having preset tendering amounts by one-

action.

Any of the following closing methods is applicable;

Direct Closing : Press a media key directly.

registrations --- TTL

Tendering Input : Enter a tendered amount then press a media key.

registrations --- SBTL --- enter tendered amount --- TTL

When entered amount is over the due amount, the change is calculated automatically in cash if

"automatic change" has been programmed.

If "automatic change" has not been programmed, a designated media should be pressed for the

change as follows;

registrations --- SBTL --- enter tendered amount --- TTL --- TTL

Preset Tendering : One-action closing to speed up tendering by use of a preset amount media key.

Preset tendering amount is memorized in the memory of pre-programmed media

number.

registrations --- SBTL ---

PRESET

TENDER

Media Multiplication : Makes it easier to sum up tendered amounts by using Ten-Keys and X2 key. This

function is available only when using one of ten (10) preset tender keys.

registrations --- SBTL --- enter number of pieces --- X2 ---

PRESET

TENDER

Automatic Closing by Clerk Insert Key (option) :

If programmed and when the clerk insert key is removed, the transaction is closed

automatically by CASH/TTL 25 key. For an Item Track operation, it is closed

automatically by NB (New Balance) key and for an Amount Track operation, it is closed

automatically by CHARGE key.

Closing by Credit Card (option) :

When a media key programmed for CARD key is pressed, Warning Message #47

"Swipe Card" is displayed. The transaction is closed by swiping a credit card and the

card number is printed below the media key symbol.

Real-time card verification function is also available with a PC via IRC line.

It sends the card data, number and payment amount, which is swiped on ECR to a PC.

Then PC sends back the classification in 20-digit message with one of six (6) message

types to ECR.

Depending on the received message type, ECR prints and displays the classification

message or ECR locks with a buzzer sound.