Operation Manual

d) Table # Assigned to a Multiple Number of Tracks

Table number assignment is available only when the Automatic Item Track Number Method is used under the

non-clerk interrupt system.

Under the clerk interrupt system, this is available when either the Automatic or the Manual Track Number

Method is used. However, the track pick-up by the assigned table number is not available.

< Assigning a Table Number to a Multiple Number of Tracks >

The same table number can be assigned to a number of tracks. Open each track and assign a table number by

using TABLE # key. This operation is useful when different groups of customers sit at the same table.

< Picking Up Tracks by Table Number (Non-Clerk Interrupt System Only) >

Tracks having same assigned table number can be picked up by the same table number.

i) Enter the table number and press TABLE # key. The first track number appears with the information of the

number of tracks assigned to the table. The track is not opened until ITEM TRACK # key is pressed. If the

table is assigned to only one track, the track will be opened automatically.

ii) By pressing TABLE # key again, the second track number will appear.

iii) When the desired track appears, press ITEM TRACK # key to open the track.

KEY ENTRY DISPLAY

3 TABLE #

<......7>

1 2

The first track # 7 which is assigned to table # 3 appears.

--- shows the number of tracks assigned to the table

TABLE #

<......8>

2 2

The next track # 8 which is also assigned to table # 3 appears.

ITEM TRACK #

<......8>

3.00

The second track # 8 is picked up.

(continue registrations)