Operation Manual

68
Post-Bill --- shows the last transaction's contents
Immediately after temporarily closing a track transaction and either BUFFER PRINT 1 or 2 key is pressed, a
post-bill is issued on a receipt in the receipt-off condition or on a slip if programmed to use.
If a Post-Bill of the track was issued previously, the automatic line finder advances the Post-Bill past the
previously-printed area, and prints only the last transaction's contents as a continuation of the previous Post-Bill.
So the Post-Bill can be used instead of the Check-Out Bill for the Item Track System which is not available for
the Amount Track System.
POST-BILL (SLIP)
<<1234567>>
Served by CLERK NAME 00001
SALMON STEAK 11.00
BEER 2.50
CURENT CHG 13.50
CHARGE 13.50
QUANTITY 2
25OCT/1999#001-000002 19:14R CLERK NAME 00001
<<1234567>>
Served by CLERK NAME 00001
CAKE 1.50
COFFEE 1.50
CURENT CHG 3.00
CASH 16.50
QUANTITY 2
28OCT/1999#001-000016 20:14R CLERK NAME 00001
*1
*2
Note: Tax is always calculated each time the track is closed by either CHARGE key or a media key.
BUFFER PRINT 1 key prints a post-bill with VAT data, BUFFER PRINT 2 key prints a post-bill without
VAT data.
Even if a slip printer is programmed to use, it is possible to print it on a receipt by SLIP OFF key depression.
< Amount Track Card >
If an optional card reader is fitted and Amount Track Cards have been prepared by a card writer, an Amount
Track is picked up by swiping the card at the beginning of a transaction.
After the Amount Track is picked up, the track is automatically closed by CHARGE key by swiping the card
again. 4-digit store code (S#-xxxx) and 7-digit amount track number (C#-0xxxxxxx) are printed before the last
line.