User's Manual

■ chapter 2 bios setup and security feature
2-8
1st Boot
Device
Set the type of device for the 1st drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, system will
attempt to load boot sector from the
Ethernet port.
2nd Boot
Device
Removable Dev.
CD/DVD
Hard Drive
Realtek Boot
Agent
Disabled
Set the type of device for the 2nd drive
BIOS attempts to boot from.
Note: If you select Realtek Boot Agent, the system will attempt to boot from the
network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the
Boot Device selection menu. You may choose CD/DVD, Hard Drive, or Realtek Boot
Agent as the first storage device to boot from. If you have already connected a USB
Floppy Disk Drive before powering up, it will appear as a Removable Device in the
Boot Device selection menu
Exit Setup
Item Selections /
Sub-menu
Description
Saves
Changes and
Exit
N/A After you have completed the BIOS
settings, select this item to save all
settings, exit BIOS Setup utility, and
reboot. New system settings will take
effect on next power-up. F10 key can be
used for this operation.
Discard
Changes
N/A Discards changes done so far to any of
the setup questions.
Load Optimal
Defaults
N/A Load Optimal Default value for all the
setup questions. F9 key can be used for
this operation.