User's Manual

2. Installation

2.1

Location

connected and close enough to the PC to allow the supplied cable to reach the PC.

The best location for the placement of this unit is in the USB devices to be

2.2 Power connection

❒ Locate the unit close enough to a electrical outlet so that the AC adapter cable

will reach the outlet without putting a strain on the cable causing the adapter

jack to be pulled out of the unit.

❒ It is recommended that the AC adapter be plugged into the electrical outlet

first, and then plugged into the unit .

❒ It is recommended that the AC power adapter be used at all times. Even though

this unit can be self powered, it is only for low speed devices and multiple

devices can cause a power shortage in the unit.

❒ It is recommended that the AC adapter to be used whenever more than one hub

is used in a stacking configuration.

❒ Do not remove the AC adapter when the unit is working.

3. Connecting

3.1 Connecting to your computer

This unit can be connected or disconnected to your PC when the computers on and

running programs, using any USB port on your computer. This product allows your

computer to interface with various USB devices. See figure below.

c o n n e c to r

Hub

c o n n e c to r

Devic e (M o u s e , J o y stick, G am epad, Keyboard,

Digita l a m e ra S a n n e r)

AC Adapter