User's Manual

4
3.2 Connecting the USB cable
A type connector
Insert USB cable into the down stream port of the PC (or) this product. Make sure
that it goes all the way into the socket and is firmly connected.
B type connector
Insert USB cable to up stream port of this product (or) USB devices. Make sure
that it does all the way into the socket and is firmly connected.
4. Initial Connection
❒ When connecting this unit for the first time a message box will display :
“Searching for unknown hardware device, searching software for installation”
❒ Your computer will then start up the Device Driver Wizard, and will install the
unit. This product is recognized as “generic USB Hub”
❒ Once your computer has confirmed installation, you can then connect any USB
devices you wish to the Hub.
❒ Please note that your particular software may have slightly different versions
of installation software and the message used in installing this device.