User Manual

Table Of Contents

B GET STARTED

Now your IBEE printer has arrived and 

your printer and set it up according to the following instructions. Please keep the original box and

protectors in case of future shipping or storing.

UNBOXING

The IBEE comes in reusable, durable packaging that has been specially designed to protect your

printer in transport. To get the SN number of your printer, you may scan the QR code on the box.

To properly unpack your printer, please follow the steps described below.

START UNBOXING

Start unpacking by correctly orienting the cardboard box, and then slide the foam packaging out of

the box by pulling the cardboard handle beneath the printer while holding the box.

REMOVE THE PROTECTION FOAM

Remove the protection wrap around the machine. Take out the printer and place it on your desk.

Make sure you hold it by the sheet metal casing while carrying it.

PUT IT ON THE DESK

Place the printer on a leveled and clean desk. Adjust the four leveling screws under the printer to

level it.

GET THE ACCESSORIES

Under the Build Platform, you will find a box with accessories inside. Take these out and put them

aside.