User Manual

ManualsBrandsUNIZ Manuals3D PrintersIBEE Resin 3D Printer UV-Curing SLA 4K 3D Printer with 8.9" Monochrome Screen (3840x2400) 4.3" Touch Screen Higher Precision Larger Build Volume7.5× 4.7"× 8.7" (192mm x 120mm x 220mm)

Table Of Contents

21

D USAGE AND MAINTENANCE

2. After the exposure is done, gently scrape off the whole piece of cured resin from Tank with a

paper card. DO NOT use the scrapper, since this may damage the film and cause a severe leak.

Change the Resin Tank Film

1. Make sure the Resin Tank is wiped clean inside and out, and put it on a clean table.

2. Flip the Resin Tank and remove the outer 16 down-side screws with a screwdriver.