User Manual

ManualsBrandsUNIZ Manuals3D PrintersIBEE Resin 3D Printer UV-Curing SLA 4K 3D Printer with 8.9" Monochrome Screen (3840x2400) 4.3" Touch Screen Higher Precision Larger Build Volume7.5× 4.7"× 8.7" (192mm x 120mm x 220mm)

Table Of Contents

22

D USAGE AND MAINTENANCE

3. Take out the Film Frame, and put it on the table then remove the remaining 18 up-side screws.

4. Wipe clean the Resin Tank and Film Frame. Be careful don’t damage the film sealer.

5. Lay the Frame flat, sandwich a new film between the Frames, then press the film with the

Acrylic Plate and Build Platform. Keep the concave surface of film upwards.