User Manual

ManualsBrandsUNIZ Manuals3D PrintersIBEE Resin 3D Printer UV-Curing SLA 4K 3D Printer with 8.9" Monochrome Screen (3840x2400) 4.3" Touch Screen Higher Precision Larger Build Volume7.5× 4.7"× 8.7" (192mm x 120mm x 220mm)

Table Of Contents

24

D USAGE AND MAINTENANCE

CHANGE LCD PROTECTIVE FILM

There is a protective film on the LCD of IBEE. If the film is scratched or dirty with cured resin, you

should change for a new one.

1. Peel off the old film.

2. Clean the surface of LCD and make sure there is no dust and residue left.

4. Take out a new film and peel off the cover film marked ①.