User Manual
Dell
PowerEdge R710 Technical Guide 40
PCI Slots
Overview
The PowerEdge R710 has two PCI Express risers: Riser 1 and Riser 2. Each riser connects to the planar through a
x16 PCI Express connector.
• Riser 1 consists of two x4 slots and a third x4 slot dedicated for internal SAS storage through the PERC
6i or SAS 6/iR.
• The default Riser 2 consists of two x8 PCI Express connectors.
• There is also an optional x16 Riser 2 that supports one x16 PCI Express card.
To ensure proper cooling, no more than two of the four expansion cards can have a power consumption of
greater than 15W (up to 25W maximum each), not including the integrated storage controller.
The system does not support hot-plug or hot-removal of PCI Express cards.
For more information on installing expansion cards and expansion-card priority, see the Expansion Cards and
Expansion-Card Risers section in the Installing System Components chapter of the Dell PowerEdge R710 Systems
Hardware Owner’s Manual on Support.dell.com
.
PCI Express Risers
The two PCI Express risers provide up to four expansion slots and one slot dedicated for the integrated storage
controller card. The slots meet the following requirements:
• Two x8 and two x4 PCI Express Gen2 slots, each connected to the IOH
• One x4 PCI Express Gen1 slot for internal storage connected to the IOH
• Support for three full-height 9.5”-long PCI Express cards and one full-height bracket, low-
profile PCB PCI Express card
• Support for customer installation of a full-length 12.2" PCI Express card in Slot 1 on Riser 1
• System support for 25 W maximum power for the first two cards and 15 W for the third and
fourth cards (lower power support on third and fourth cards due to system thermal
limitations)
• Optional x16 riser to accommodate interface cards for external GPU boxes that supports a
maximum power of 25W (use of riser reduces the number of PCI Express slots from four to
three)
The following riser restrictions apply for the R710:
• The riser connectors on the planar do not support plugging in a standard PCI Express card.
• Two R710 risers must be installed or the system will not power up.
Express Card Specifications (x16)
For information about x16 PCIe card specifications, see the Expansion Cards and Expansion-Card Risers section
in the Installing System Components chapter in the Dell PowerEdge R710 Systems Hardware Owner’s Manual on
Support.Dell.com
.
Quantities and Priorities
Refer to the Expansion Cards and Expansion-Card Risers section in the Installing System Components chapter of
the Dell PowerEdge R710 Systems Hardware Owner’s Manual on Support.dell.com
.