Operation Manual

ManualsBrandsUnlimited Audio Technology ManualsAudio EquipmentTrue Wireless Stereo Microphone

SmartMicOperationManual



1.PackingList

SmartMic*1

Chargingcable*1

Manual*1



2.Poweron/off

1)Poweron:Pressandholdtheswitchbuttonforthreeseconds,theLEDindicatorflashesblue，

theBTiswaitingforconnect.

2)Poweroff:Longpresstheswitchbuttonforthreeseconds,theLEDindicator

willgoout.

3.BTconnection

TurnontheBTofthemobilephone,searchfor"SmartMic"andpairwithit.Theindicatorlight

flashesblueonceevery5seconds,theBTisconnected.Automaticallyshutdownwithoutpairing

within5minutes.



4.Appdownload

1)Thisdevicecanbe

usedwithSmartMike+App.

2)PleasescantheQRcodebelowtodownloadtheAPP.

3)Registerafterdownloadtouse.



5.APPoperation

1)OpentheSmartMike+APP,thedeviceconnectionstatuswillbedisplayedatthetopofthe

screen,andthedevicelogocanbediscovered.

‐

VideoRecordingMode

‐RecordingMode

2)RemoteRecording

‐Afterthedeviceisconnected,turnontheAPPandpressthebuttontocountdownforthree

secondstostartvideorecording.

‐Pressthebuttonagainduringrecordingtoendtherecording.

3)LensSwitching

‐Quicklypressthebuttontwice

duringrecordingtoswitchthefrontandrearlensofthecamera.



6.Powersupplyandbattery

1)Afterthedeviceisconnected,theremainingpowerofthedevicewillbedisplayedonthetop

ofthephone.

2)Inthecaseoflowbattery,theindicatorlightofthe

deviceissteadyred.

Summary of content (4 pages)

PAGE 1
SmartMic Operation Manual 1. Packing List SmartMic*1 Charging cable*1 Manual *1 2. Power on/off 1) Power on: Press and hold the switch button for three seconds, the LED indicator flashes blue， the BT is waiting for connect. 2) Power off: Long press the switch button for three seconds, the LED indicator will go out. 3. BT connection Turn on the BT of the mobile phone, search for "SmartMic" and pair with it. The indicator light flashes blue once every 5 seconds, the BT is connected.
PAGE 2
3) Fully charged in about 1.5 hours. Please use the included TYPE‐C charging cable for charging. The indicator light is red when charging. The indicator light turns green when the charging is completed. 4) The usage time is about 6 hours at full power. Please charge the device fully before using it for the first time. 5) Fast charging is not supported. PRECAUTIONS 1. Do not disassemble the device shell without authorization; 2.
PAGE 3
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 4
CE Maintenance 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.EUT Operating temperature range: 0° C to 40° C . 3.The device complies with RF specifications when the device used at 0mm from your body. Declaration of Conformity We hereby declares that this SmartMic is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.