User's Manual

Unnecto™ Primo 3G User Manual
6
8.4 Auto power on/off
Set time to power on/off the phone automatically.
8.5 Restore factory settings
Reset the phone to default values (factory settings).
The phone password is required, which is "1234" by default.
8.6 Display settings
Wallpaper settings: Set the standby image of the phone.
Idle display setting: Set Idle display.
Contrast: Set the backlight brightness.
Keypad backlight time: Set the Keypad backlight time
Auto keypad lock: Keypad lock prevents the unintentional phone usage.
However, you can still be called and you can make emergency calls.
9. Security
The phone provides several security options to protect your phone from misuse.
1. PIN
Open: enable PIN inspection, every time you open the cellular phone, need to
input PIN code.
Update: you must open the PIN code firstly to modify PIN code.
Close: enter the correct PIN code.
Warning: Please be careful using this function. Do not forget PUK password. If PUK
password is forgoten, please consult the network operators. If PUK code is entered
incorrectly 10 times, the SIM card will cease to function.
9.1 Phone lock
If the phone lock is activated, the phone lock password is requested after the phone
switched on. The default password is "1234". If the phone is locked, only emergency
calls can be made.
Modify the cell phone password
The password of mobile phones can be reset.
Lock screen by end-key
Set a key lock according to hang up key screen.
Fixed dial number
Open the fixed dial-up function. If not you should find an operator for help.
Blacklist
The phone cannot receive the call from this number if this number was added to the
black list of the phone.