User's Manual

Unnecto™ Omnia User Manual

2. Installing and Removing the SIM Card

 Switch off the phone and remove the battery.

 Insert the SIM Card into the designated SIM 1 or SIM 2 slot.

 To remove the SIM Card; turn off the phone; remove the battery;

then remove the SIM Card from the SIM Card slot.

3. Installing and Removing the Micro SD Card

 Turn off phone before inserting or removing the Micro SD Card.

 To insert, slide the Micro SD Card into the Micro SD Card slot

(Micro SD Card facing up), located inside the back of the phone.

 To remove, pull the Micro SD Card out of the slot.

4. Installing and Removing the Battery

 Turn off the phone before removing the battery.

 Remove the back cover to access the battery.

 Place the battery into the phone; aligning the battery pins to the

phone’s pins.

 To remove the battery, lift up the crease on the corner of the

phone.

5. Charging the Battery

 Plug the provided charger into a standard wall outlet.

 Plug the Micro USB charger into the USB port of the phone.

 When the phone is fully charged; unplug the charger from the

standard wall outlet and from the phone.

 If the phone automatically powers off or the battery indictor is low;

then you should immediately charge the phone.

6. First Time Startup

 Make sure one or two SIM cards are inserted before powering on

the phone.

 Make sure the battery is charged for at least 30 minutes before the

phone is powered on.

 Create or sign in an existing Google account for access to the

Android features.