Operation Manual

12
CLEANING AND CARE
Allow the appliance to cool before cleaning it.1.
Before cleaning, always turn off the appliance and 2.
unplug it from the power supply.
Do not immerse the base, power cord or 3.
kettle in water or other liquids or wash them
in the dishwasher.
Wipe off the base and the kettle with a damp 4.
cloth and a little dishwashing detergent. Do
not use any abrasive scouring agents, steel
wool, metal objects, hot cleaning agents or
disinfectants, since they can damage the
appliance.
The appliance must be completely dry on 5.
the outside before you use it again.
DESCALING
To keep the appliance operating efficiently 1.
and to prolong its service life, it should
be descaled regularly, depending on the
hardness of your water.
To descale the kettle, fill it no more than 2.
half full with a solution of half water and
half household vinegar. Bring the liquid to a
boil and leave it in the kettle for a while.
Pour the descaling solution out of the 3.
kettle.
Then fill it with fresh water and bring to a 4.
boil. Pour this water out as well. Then rinse
the kettle at least twice with clear water.
Of course, you can also use commercially 5.
available descaling products; please follow
the instructions on the package.
Open the lid to fill in water. When using the 4.
appliance for the first time fill the kettle
with water up to the MAX mark.
Do not fill the kettle with more than 0,5 l of 5.
water and less than 0.2 l.
CAUTION! 6.


Make sure, that the lid is closed correctly7.
Plug the power cord into the power socket.8.
CAUTION9. !
If by any reason whatsoever the appliance
has not been switched off automatically by
the boilstop during the last use, it starts
immediately to heat after the plug has been
put in the power socket. In this case wait
until the water boils and the automatic boil
stop switches the appliance off. For the
next boiling use the ON switch to switch the
appliance on.
Switch on the kettle by pressing the ON/OFF 10.
switch. The control lamp turns on.
Bring the water to boil and then pour out 11.
the water. Then refill with fresh water and
boil again.
The kettle automatically stops heating when 12.
the water boils at the latest.
Please allow the kettle to cool down for a 13.
certain time before using the kettle again
to heat water.
CAUTION14. !
As soon as the switch has been pressed, the
appliance cannot be switched off manually,
but only by the automatic stop when the
water boils.
Always use fresh and cold water. Do not 15.
leave water in the kettle.
Switch off and unplug electrical appliances 16.
after use.