Operation Manual

19
trOuBlEshOOtInG
Problem Solution
The appliance does not operate. Check to make sure that all parts have been 
assembled correctly. If this is not the case, a safety
system prevents the appliance from being switched
on. Assemble the appliance again as described in
the section “Preparing the appliance for operation”
on page 15.
The motor stops during extraction of
juice.
Switch the appliance off; unplug it from the power 
supply.
Disassemble the appliance as described in 
“Disassembly” on page 16 and check whether the
sieve is jammed by pieces of pulp. Clean the sieve
under warm running water with a plastic dish brush,
reassemble the appliance and continue processing.
To prevent the sieve from becoming jammed, do not 
use fruits or vegetables that are very hard or stringy.
Do not add fruit or vegetables to the filling shaft too
quickly and empty the pomace container regularly.
The stainless steel sieve stops turning. Switch the appliance off; unplug it from the power 
supply.
Disassemble the appliance as described in 
“Disassembly” on page 16 and check whether the
sieve is jammed by pieces of pulp. Clean the sieve
under warm running water with a plastic dish brush,
reassemble the appliance and continue processing.
To prevent the sieve from becoming jammed, do not 
use fruits or vegetables that are very hard or stringy.
Do not add fruit or vegetables to the filling shaft too
quickly and empty the pomace container regularly.
Low juice yield. Check whether the sieve is jammed. 
Add the ingredients more slowly into the filling 
shaft.
Some fruits and vegetables yield less juice, for 
example apricots.