Specifications
16
TiLT proTecTion
When you lightly shake
the appliance you will
hear a noise coming from
the interior of the appli-
ance. This is caused by
the tilt protection technology used; there is no
defect in the appliance!
The tilt protection switches the appliance off
immediately, as soon as the appliance tilts to
a position where safe operation is in jeopardy.
THe iDeaL LocaTion
BeFore uSing THe appLiance THe FirST Time
1. Maintain an adequate safety distance (at
least 1 meter) to other objects, such as
furniture, curtains, etc.
2. Only place the appliance in operation in a
vertical position.
3. Ensure that air can flow in and out unhindered
- do not, under any circumstances, cover the
air inlets of the appliance.
4. Only place the appliance on a solid and
level substrate. Do not place the appliance
on soft surfaces (sofa, bed) because the
appliance can tip over.
5. In addition, ensure that the appliance is
not set up on deep-pile carpets or in dusty
environments.
6. Never place the appliance directly under an
electrical outlet, and ensure that the power
socket used is easily accessible at all times.
7. Check whether the power cord is routed in
such a manner that no one can stumble over
it.
8. The power cord should not touch any
housing parts, this could cause the cable to
melt.
1. Remove all packaging materials and any
transport safeguards.
2. Check whether all listed accessory parts are
present and intact.
3. Comply with all instructions that are spe-
cified in the chapter, “The ideal location”,
and find a suitable location.
4. When you use the appliance for the first
time, or if it has not been operated for an
extended period of time, a slight odour can
occur.