OPERATING INSTRUCTIONS AM/FM SYNTHESIZER TUNER DT-920 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference.
CONTENTS 1 1 2 3 3 3 4 4 5 6 6 6 TO USE YOUR UNIT PROPERLY AND SAFELY ACCESSORIES CONNECTIONS CONTROLS LISTENING TO THE RADIO FREQUENCY UP/DOWN TUNING DIRECT TUNING AUTOMATIC OR MANUAL PRESET TUNING LISTENING TO PRESET STATIONS MAINTENANCE TROUBLESHOOTING GUIDE SPECIFICATIONS TO USE YOUR UNIT PROPERLY AND SAFELY - Do not damage the power cord. - When not in use, disconnect the power cord from the outlet. Grasp the plug, not the cord, when disconnecting the unit.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN These markings are located on the bottom, side or back of the unit. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
CONTROLS 9. Scan level button (SCAN LEVEL) 10. Automatic/Manual tuning select button 1. Power button (POWER) 2. Channel/Frequency select button (CH/FREQ) (AUTO/MANUAL) 3. Display (MULTI-FUNCTION DISPLAY) 4. Band select button (BAND) 5. Tuning button (DOWN TUNING UP) 6. Preset tuning buttons (PRESET) 7. Direct-in button (DIRECT IN) 8. Memory button (MEMORY) LISTENING TO THE RADIO Preparation 1. Press the POWER button on the tuner. FREQUENCY UP/DOWN TUNING Automatic tuning Manual tuning 1.
DIRECT TUNING 1. Press the BAND button to select AM or FM. 2. Press the DIRECT IN button. "FM ---. -- MHz" or "AM - - - - kHz" appears and blinks. 3. Press the PRESET buttons (1 - 0) to enter the frequency of a broadcast station. Example: FM 98.1 MHz... Press 9, 8 and 1. FM 103.5 MHz... Press 1, 0, 3 and 5. AM 560 kHz... Press 5 and 6. AM 1680 kHz... Press 1, 6 and 8. NOTE: If you try to enter an incorrect station frequency (86.
LISTENING TO PRESET STATIONS Program stations as described in "AUTOMATIC OR MANUAL TUNING." Using the TUNING "UP" or "DOWN" button Using the PRESET button 1. Press the CH/FREQ button to select the channel mode. ("FREQ" disappears.) 2. Press the TUNING "UP" or "DOWN" button until the desired channel number appears on the display. - The preset station for the selected channel number can be heard. 1. Press two PRESET buttons (1 - 0) to select the desired channel number. Example: CH01 ...
MAINTENANCE Cleaning the cabinet Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzol, benzene or other strong chemical cleaners since these could damage the finish of your unit. It is important that no liquid reaches the inside of the unit. WARNING: FOR YOUR PERSONAL SAFETY, BE SURE TO DISCONNECT THE AC POWER CORD BEFORE PROCEEDING WITH ANY MAINTENANCE OR CLEANING.
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CAUTION: Changes or modifications not expressly approved by TOA may void the user's authority to operate this equipment.
