- micro cd system User Guide

Programming CD and MP3 Play

This feature programs the order in which tracks are played. You may

program up to 64 CD tracks and 64 MP3 tracks.

1. With the CD or MP3 in Stop mode, press PGM on the remote

control. For CDs, 00 P--01 PRGM appears on the display.

For MP3s, 000 flashes on the display, and P--01 PRGM appears.

2. Press - FOLDER/ or + FOLDER/ to locate the desired CD

track or MP3 folder.

3. Press PGM to confirm your selection. For CDs, 00 P--002 PRGM

appears on the display.

For MP3s, 000 flashes on the display and P--01 PRGM appears.

4. For MP3s, press - FOLDER/ or + FOLDER/ again to locate

the desired MP3 track. Press PGM to confirm your selection.

5. Repeat Steps 2-4 to program other tracks or folders for your

desired sequence.

6. Press ENTER to play your programmed sequence.

Note:

•After the last programmed track or folder is played, the CD or MP3

stops playing automatically. To replay the programmed sequence,

press PGM, then ENTER .

•To cancel programmed play, you can open the CD COMPARTMENT

DOOR or press HOME two times when you are in CD or

MP3 mode.

512574 Micro System w/MP3 Doc. Size: 5"W x 4.75"H

Output at 100% Prints 1/0 Black

LOCAT