User's Manual

Page36
Press the ▲ and ▼ button to set the MONTH, the
press the ► button to navigate to the DATE and use
the ▼ and ▲ buttons to set the date. Press the ►
button to navigate to the year and set that using
the ▲ and ▼ buttons.
Navigate down to the time using the ► button and
follow the same process as above to set the time.
Once you have the time set, press OK to save the
settings.
TIME STAMP: Press the ▼ button to highlight the
Time Stamp option. The default setting for the
Time Stamp option is ON. This puts the Time, Date,
Temp and moon phase at the bottom of the
camera. If you do not want the Time Stamp ON,
use the ► button to toggle to the OFF position.
Press OK to save the settings.
FLASH RANGE: You can set the Flash Range
depending on your set up. If most of the subjects
are going to be inside 20’, use the LOW setting. If
you need extended night vision, choose the HIGH