User's Manual
Table Of Contents
- Camera Button Control Diagram:
- Understanding main screen info:
- /
- Installing the batteries:
- Setting the camera mode:
- Camera mode settings:
- Video mode settings: (Figure 20).
- SYS tab:
- Viewing photos on the color display:
- Troubleshooting:
- Tricks and tips on field setup:
- Covert Scouting Cameras Warranty:
- Covert Warranty Policy and Procedure:
- Covert International Warranty Policy and Procedure:
- /Set Up on a MAC:
Page31
phone numbers/email address then you need to
have a three minute trigger interval.
TIP: You can press and hold the ◄ or ► button to
speed through the settings rather than repeatedly
pressing the button.
TIME LAPSE: Press the ▼ and ▲ arrow to highlight
the Time-Lapse option. This option allows your
camera to automatically take a photo without being
triggered by the PIR. If you already set the
Sensitivity to OFF, then the camera will only take
photos when the Time-Lapse option is on. If you
have the PIR set to LOW, NORMAL, or HIGH, the
camera will also take photos when the PIR is
triggered. To turn the Time-Lapse option on, use
the ◄ and ► buttons to choose a time option. 5-
60 seconds (in 5 second increments) and 2-60
minutes. Once you have chosen the time option
you want, press OK to save the setting. The camera
will continuously take photos in timed increments