Installation Manual

Universal Vertical Filing Rack

The Up Filer Mini

™

The Up Filer™ Mini can accommodate a wide

variety of dierently sized items while never

allowing larger items to hide smaller ones.

The pivoting hanger design allows for quick

and easy addition and removal of items.

Simply lift a hanger and add or remove an

item below it.

It's perfect for graphic design, architecture,

ne art, teaching or any need for ling

dierently sized at content.

Locating labels at the bottom of the led

items allow for quick visual scanning of all

items stored. Used as "hot folder" or job

jacket storage, it gives you piece of mind

by ensuring that nothing will fall out of

sight and be forgotten.

WARNING: Always keep delicate materials, such as photographic prints or original works of art,

protected between rigid cardboard sheets (or similar material) to avoid damage while in the Up Filer.

Simply lift a hanger

and insert or remove

an item below.

PAGE 1
The Up Filer Mini ™ Universal Vertical Filing Rack The Up Filer™ Mini can accommodate a wide variety of differently sized items while never allowing larger items to hide smaller ones. The pivoting hanger design allows for quick and easy addition and removal of items. Simply lift a hanger and add or remove an item below it. It's perfect for graphic design, architecture, fine art, teaching or any need for filing differently sized flat content.
PAGE 2
MOUNTING NOTE: While unpackaging and mounting, handle the rack by the wooden spine only. Do NOT lift by holding the metal hangers. It is best to mount the rack to a wall stud, however, anchor bolts for mounting into drywall are included. PLACING ON WALL Place the rack on the wall, aligning the round holes in the mounting hardware with the screws in the wall. Push the spine of the rack against the wall and pull down carefully but firmly.