Instruction Manual

STEP 2: To use USB mode, insert a compatible USB drive into the USB port. The speaker
will automatically change to USB mode.
[3 MM CAP HEIGHT, KEY LINE BOX]
Note: Once connected, sound can be controlled using the speaker.
No USB drive should be inserted whilst using MICRO SD mode or vice versa, as this could
interfere with playback.
The speaker will only recognise MP3 audio files; if other files are present on the MICRO SD
card or USB drive, this may prevent the speaker from playing.
Specifications
Product Code: EE2763
Bluetooth Version: 5.0
Wireless Distance: Up to 25m*
Speaker Output: 2 x 3 W
Impedance: 4 Ω
Sensitivity: 85 dB
Frequency Response: 20 Hz-20 kHz
Charging Voltage: 5 V [DC SYMBOL]
Battery: 3.7 V 400 mAh
Bluetooth Frequency: 2.4 GHz
This device complies w ith Part 15 of the FCC Rules. Operation is subject to the follow ing tw o conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the
user’s authority to operate the equipment.
FCC Statement:
“This equipment has been tested and found to comply w ith the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause
harmful interference to radio communications. How ever, there is no guarantee that interference w ill not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, w hich can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation betw een the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to w hich the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help