25" LCD HDTV Up star USA Group 1855 S.Vineyard Ave.Suite No.1 Ontario, CA 91761 Toll-free: 1-877-908-6777 Tel: 562-972-8098, Fax: 562-972-8068 E-mail: Sales@Upstarusa.com www.Upstarusa.com MODEL: P250WT (Please read this manual carefully before operating the set And retain it for future reference.
Contents Important Safety Instructions ................................................................................. 1 WARNING........................................................................................................................ ..............1 Caution........................................................................................................................ ..................1 Important........................................................................................
Important Safety Instructions WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTRUE. Caution These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in The operating instructions unless you are qualified to do so.
2) Keep these instructions. 3) Heed all instructions. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers Instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other Apparatus (including appliers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.
GENERAL INFORMATION Figures and illustrate In this User Manual are provided for reference only and may different from Actual product appearance. Product design and specificaorder to May be changed without n enhance product performance. Accessories Remote Control Power Adapter Power Cord AV Cable User Manual Warranty Please make sure the following items are included with your LCD TV. If any items are missing, Contact your dealer. The items color and shape may vary depending on the model.
Remote Control 1. POWER: Turns the TV on and off. 2. INFO: Press to display informal on to the TV screen. 3. Guide: Pres Viewing a digital TV program. 4. MUTE: Press to temporarily cut off the sound. 5. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). 6. 0-9 /- : Pres Channel, also can be used in teletext Page choosing. Program channel, such as 2-1 act. 7. R: Press to switch between the current and the previous Channel. 8.
Batteries Installation of Remote-Control Unit 1. Li the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size Eries. Make sure to match the ‘+’ and ‘-’ ends of the be Is with the diagram inside the Compartment. 3. Replace the cover. Remove the And store them in cool, dry place if you won’t be using the remote Control for a long (Assuming typical TV usage, the Should last for about one Year.
Speakers Speakers 11 VGA IN DC12V POWER IN HDMI USB L R AV IN PC AUDIO IN Earphone Out Pr/Cr BP/Cb Y R TUNER 1 2 3 4 5 6 7 8 1 Power input/DC12V 7 PC Audio in jack 2 USB jack 8 Earphone Out 3 COAX jack 9 Y, Pb, Pr and AUDIO (R/L) jack 4 AV IN VIDEO and AUDIO (R/L) jack 5 PC jack 6 TV jack The product color and shape may vary depending on the model.
CONNECTIONS Installing an Antenna For co ng to ATSC or NTSC broadcasts POWER IN DC12V POWER IN VGA IN USB HDMI L R AV IN TUNER PC AUDIO IN Earphone Out Press SOURCE but on the remote control to select TV, then press ► but on to contra. Then you can receive the ATSC/NTSC signal.
Satellite/Cable TV Set-Top Box To the Composite terminal In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate Receiver (SET-Top-Box) Terminals of other equipment By manufacturer and model. L R AV IN Y Y Y Y AV Cable Connect His LCD TV’s Composite In terminal to the cable Receiver Composite Out Terming using the Composite cable. (Make sure the color o terminals and the color of cable are The same.
DVD To the Component terminal Terminals of other equipments differ by manufacturer and model. < DVD > Component Audio cable Pr Pb Y R L Y Pb Pr R L Y 1. Connect LCD TV’s Y, Pb, Pr terminal to DVD’s Video Out terminal using the external cable. 2. Connect LCD TV’s Audio terminals (le & right) in AV1 to DVD’s Audio Out terminal using the Audio cable. 3. It must match the component co Cable Y, Pb, Pr between the LCD TV and DVD Player.
PC Connect Terminals of other equipments differ by manufacturer and model. Analog RGB (D-Sub 15pin) Cable PC Audio Cable Connect LCD TV’s PC Input terminal to PC’s RGB terminal using the D-Sub cable. Connect LCD TV’s PC Audio terminal to PC’s Audio terminal using the Audio cable. (Only for PC’s with Audio terminal) How to Use as PC monitor 1. Turn on the LCD TV and press SOURCE but on on the remote control. 2. Use ▲/▼ to move to “VGA”.
Basic Use Powering the LCD TV Power on/off To turn the LCD TV on: Press the “POWER” but on. To turn the LCD TV off: Press the “POWER” but on on the LCD TV. To turn on/off by remote control: Press the “POWER” bu on of the remote control. Input Source You can select between the TV signal and the input signal of other equipments Connected to the TV. Use this To switch to the input source you wish to view. Press INPUT but on on the remote control. Use ▲/▼ but ones to move to the desired input source.
Applica Opera The Menu 1. Press the POWER but on to turn the LCD TV on. 2. Press the MENU but on on the remote control, the on-screen menu will appear on the Screen. 3. Use the ◄/► To select your main menu PICTURE MENU: Allows you to make adjustments your picture se nags.
Parental Control MENU: Set program rating control and input source, keypad lock function. V-CHIP Change Password Keypad Lock Source Lock 0-9 SETUP MENU: Select closed caption options, anguage and time. ：Move OTHERS MENU: Set the OSD blue background, whether auto power off if no signal or no operation, clear All user settings, etc. ：Move 4. Use the ▲/▼ buttons to select an option of the sub-menu, and press the ► button. While in adjustment mode, use the ◄/► button to change the value of the item. 5.
PICTURE MENU Picture Settings Screen Size PC Settings Color Temperature Normal Advanced Picture Settings Move ▲ Press / to highlight one of the f less ENTER or to enter next subMenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous menu. Picture Set Adjust the picture quality including brightness, contrast, and color Sharpness. For details. Screen Size Press / To sleet the display aspect rag To the screen. E deferent according to deferent input source.
PICTURE MENU/ PICTURE Settings : Return : M over When Picture Mode is set to User, the following settings can be manually adjusted. Press PMODE shortcut button on the remote control to select picture mode directly. Adjusting the values Picture Mode Highlight the item and Press ◄/► to select. Movie/Dynamic/Standard/User Brightness/Contrast/Color/Tint/Sharpness ►, and a process bar Appears, then press ◄/► to adjust the value. Tint is Available when analog TV or NTSC-system AV or Svideo.
PICTURE MENU/ PC Settings : PC Settings Menu is available only in PC DB15 or DVI mode. When DVI signal input, only Horizontal Position and Vertical Position can be adjusted. Press ▼/▲ to highlight one of the following options, and then press ENTER to select it. Auto Adjust Automatically adjusts Clock, Phase, H-Position and V-Position settings. In order to get a good result, you should open a“filling the screen "picture before executing Auto Adjust.
PICTURE MENU/ Advanced Picture Settings : Move Press ▼/▲ to highlight the item and press ENTER or ►to display the sub-menu as following. Dynamic Contrast Off/Low/Medium/High The system will adjust the luminance curve by analyzing the picture content dynamically. Film Mode Off/On For the 2:2 or 3:2 format signal of cinema, enable special pixel process to reduce the flick of moving Area. Noise Reduction Off/Low/Medium/High You can clear up analog TV signal by reducing the dot noise.
SOUND MENU Sound Settings Surround Mode AVL Analog Sound Digital Sound Digital Audio Output PCM Equalizer Settings : Move Sound Settings Surround Mode Set the sound mode, and Bass /Treble/Balance. Set to enjoy the virtual surround sound. Press ENTER to set or cancel. AVL Auto Volume Level. Press ENTER to set or cancel. When AVL is set on, it will limit the Sound being heard when sudden changes in volume occur during commercial breaks or Channel changes. Usually be enabled at night.
SOUND MENU/ Sound Settings SOUND SETTINGS : Move Sound Mode Standard/Dynamic/Soft/User Only in User mode, the follow items can be adjusted. Bass Adjust the low frequency band response. Treble adjust the high frequency band response. Balance Adjust the level of sound coming from the left or right speaker. Adjust the Bass/Treble/Balance 1 Set Sound Mode to User. 2 Highlight the item and press ◄/► to display The sub-menu, then press ◄/► to adjust the value.
SOUND MENU/ Equalizer Settings Mode Pop : Move Mode Off/Rock/Pop/Jazz/User (only in User mode, the following can be manually adjusted.) Adjust Equalizer Settings Based on your favorites about which frequency band need to be adjusted, make small Adjustment with certain frequency band at a time. Suggest NOT making too large changes. 1 Set Mode to User. 2 Press ▼ to select the rest (100Hz) item, then press ◄/► to select the band to be turned. 3 Press ▼/▲ to adjust the value.
CHANNEL MENU Channel Settings : Move Note: The menu is available only at TV source. Channel List You can view all the channels and choose one quickly. For details of setting. Favorite List all of your favorite channels are listed in this menu and you can choose them Quickly. For details of setting. Channel Setting Set the favorite channels, skipped channels, label of channels. Signal Type Set to Air or Cable according to your antenna source. When set to Air, TV can catch 8VSB broadcasting signal.
CHANNEL MENU/ Channel List D10-1 ABC A51 A52 A53 : Move “ABC”: Label of the Channel. Press ▼/▲ to highlight a channel and press ENTER to view it. CHANNEL MENU/ FAVORITE LIST The list shows channels that you set as favorite. See "Channel Settings” on page 17 to understand how to set channels be favorite.
CHANNEL MENU/AUTO CHANNEL SEARCH-Air : Stop Auto Channel Search : Skip It will search analog channels rest, then digital channels. Before execute auto channel search, please contra your antenna type is Air or Cable. Wrong setting of Signal Type maybe causes finding no channel. Found numbers do not Include encryption programs.
Channel MENU/Channel SETTINGS CHANNEL SETTINGS Channel Skip Favorite Label ABC D10-1 A51 A52 A53 : Cursor/Page Skip Set the channel to be skipped when using CH+/Ch- to view channels. Favorite Set the channel to your favorite list. Label Rename label of the channel. Change the settings Skip & Favorite 1 Press ▼/▲ to select the channel you want to set. 2 Press ◄/► to highlight corresponding item, and press ENTER to set or cancel.
PARENTAL CONTROL MENU V-CHIP Change Password Keypad Lock Source Lock 0-9 ：Enter Password Note: The default user password is “0000”, and if forget what you set, try“1470”. Lock Parental Control The following items are only available if the password input Is correct. V-CHIP Include below settings: US V-Chip Rating system used at USA. Canada V-Chip Rating system used at Canada. Block Unrated Show Control whether locks the program that have not any valid rating bags.
PARENTAL CONTROL MENU/ Lock PARENTAL CONTROL Settings ▲ Press ▼/▲ to highlight one of the following options, and then press ENTER or to enter next subMenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous menu. How to access to hotel menu 1、Press the menu button on the remote control, the main menu will display. 2、Choosing“PARENTAL", look for and select“Lock Parental Control "option .
PARENTAL CONTROL MENU/ Hotels Lock Settings HOTEL SETTING Boot Setting Hotel Lock Setting Power Save Off Export Setting Execute Import Setting Execute Reset Hotel Setting Execute ：Move A. Tuner Lock: Press▲▼ to select tune to lock, then press ENTER to set it to lock. Moreover, it could not search the Channel, .but change available channel. B. Keypad Lock Press ▲▼ to select keypad if you want to lock, and then press ENTER to set it to lock.
PARENTAL CONTROL MENU/US V-CHIP For the United States, the rating setting basically include the following options: Movie Rating, TV Rating. PARENTAL CONTROL MENU/ Movie Rating This system dense the rating control which come from MPAA rules. : Move Rating Deane G General audience. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R Restricted.
PARENTAL CONTROL MENU/ TV Rating The TV rating composes of two aspects: age-based and content-based. : Move Deane Content Deane TV-Y General audience FV Fantasy violence TV-Y7 Parental guidance suggested D Suggestive dialogue TV-G Parents strongly cautioned L Strong language TV-PG Retracted S Sexual situations TV-14 No one 17 and under admitted V Violence TV-MA Adult audience only Age Note: The content ratings will increase depending on the level of the age-based rating.
PARENTAL CONTROL MENU/ Canada V-CHIP For Canada, the rating settings include the following options: English Rating, French Rating. English Rating These ratings are for programs which are using English rating system. Rating Denned as C Children C8+ Children 8 years and older G General programming ENGLISH RATING C C8+ G PG PG Parental guidance 14+ 14+ Viewers 14 and older 18+ 18+ Adult programming : Move French Rating The ratings are for programs which are using French rating system.
SETUP MENU/ Digital CC Style CC Size Small CC Font Style4 CC Opacity Solid Text Color Red CC Background Opacity CC Background Color Transparent Default CLOSED CAPTION : Return : Move This menu is valid only for digital closed caption of digital channels.
SETUP MENU/ Clock Daylight Saving Time : Return ： Move : Return Time Zone Hawaii/Alaska /Pacific /Central/Mountain/ Eastern/ Samoa/Newfoundland/Atlantic Auto Clock If set it to ON, the TV will sync the local clock according to the DTV broadcasting time Automatically. Otherwise you can set the time manually. Setup Time Set Auto Clock to Off, then you can set the time manually. Note: In the case of loss of power, the clock setting will be lost.
Others MENU : Move Blue Back Set the screen background color blue or not when no valid signal input. When analog TV input and has no signal, snow noise will display if this option is cleared. No Signal Power Off If it is set, TV will automatically enter standby after 10 minutes Without signal input. No Operation Power Off If it is set, TV will automatically enter standby after 3 hours Without any operation.
PC Mode Se ng up your PC so ware (based on Windows XP) The Windows display-se nags for a typical computer are shown below. But the actual screen on Your PC will probably be deferent, depending upon your par culler version of Windows and your Par collar video card. But even if you're actual screen looks different, the same, basic set-up Informal on will apply in almost all cases. 1. First, click on “Control Panel” on the Windows start menu. 2.
Trouble shooting Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized Service center. Problem Action The screen does not Is the power plug pulled out? Insert the power plug. Appear. Press the power button of the remote control.
