Use and Care Manual

14.8 V @ 25 C

Kinetik is a registered trademark of Universal Power Group, Inc.

Exhaust

Before lling, ensure your new battery is the correct size for your vehicle. Once the battery is lled, it cannot be returned to vender.

Only use the acid pack that comes with your battery.

Fill all cells to the "FULL" mark and wait 30 minutes.

After 30 minutes, any cell that has settled below the "FULL" mark should be topped o to the "FULL" mark.

Replace the sealer caps before charging the battery.

Charge the battery fully before installing.

Never charge this battery with a charger that delivers more than 0.5 amps of current. Larger chargers will harm the battery.

Kinetik recommends our 12V 5A charger (D1730).

488 S. Royal Lane Coppell, Texas 75019 P 469.892.1122 T 866.892.1122 F 469.892.1123 sales@apbatteries.com

G1531-2

Warranty

1 Year Full Replacement

L: 4.72” (120 mm) W: 2.36” (60.0 mm) H: 5.12” (130 mm)

www.upgi.com

5 Ah

12 Volts

4.19 lbs. (1.90 kgs)

0.5 A

Maximum Charging Voltage

All specications are subject to change without notice.

www.apbatteries.com

Specification

Charging Instructions

Filling Instructions

Physical Dimensions: in (mm)

Due to continuous improvements to our products, product may vary slightly from depiction.

Equivalent to 12N5-4B

UPG No. 41533

STANDARD CONVENTIONAL

AP SERIES

POWERSPORTS BATTERIES

PAGE 1
AP SERIES UPG No. 41533 POWERSPORTS BATTERIES STANDARD CONVENTIONAL Equivalent to 12N5-4B Specification 12 Volts 5 Ah 4.19 lbs. (1.90 kgs) 0.5 A Maximum Charging Voltage 14.8 V @ 25 C F 1 Year Full Replacement Warranty Physical Dimensions: in (mm) Due to continuous improvements to our products, product may vary slightly from depiction. L: 4.72” (120 mm) W: 2.36” (60.0 mm) H: 5.12” (130 mm) Exhaust Filling Instructions Before filling, ensure your new battery is the correct size for your vehicle.