MSDS

ManualsBrandsUPG ManualsElectricalAP400 400-Watt 120VAC Portable Power System

SECTION 1: PRODUCT NAME

Valve regulated lead-acid batteries.

SECTION 2: HAZARDOUS COMPONENTS

COMPONENTS %WEIGHT TLV LD50 ORAL LC50 INHALATION

LC50

CONTACT

Lead (Pb, PbO, PbSO) 24 (500) mg/Kg N/A

N/A

N/A N/A

N/A

About 70%

Sulfuric Acid About 20% 1 mg/m

(2.140) mg/Kg

About 5% Fiberglass Separator

About 5% ABS or PP

SECTION 3: PHYSICAL DATA

COMPONENTS DENSITY MELTING POINT

SOLLUBILITY

(H2O)

ODOR APPEARANCE

Lead 11.34 327.4°C (Boiling) None

None

Silver-Grey Metal

Lead Sulfate 6.2 1070°C (Boiling) 40 mg/L(15°C) White Powder

Lead Dioxide 9.4 290°C (Boiling) Brown Powder

Sulfuric Acid About 1.3 About114°C (Boiling) 100% Acidic

Clear Colorless

Liquid

ToxicSlightFiberglass Sep.

White Fibrous

Glass

SolidNo OdorNoneABS or PP

SECTION 4: PROTECTION

COMMENTS PROTECTION EXPOSURE

SKIN Rubber gloves, Apron, Safety shoes

Protective equipment must be worn if battery is cracked or

otherwise damaged.

A respirator should be worn during reclaim operations if the

Respirator (for lead) RESPIRATORY

TLV exceeded.

EYES Safety goggles, Face Shield

488 S. Royal Lane Coppell, Texas 75019

Summary of content (4 pages)

PAGE 1
SECTION 1: PRODUCT NAME Valve regulated lead-acid batteries. SECTION 2: HAZARDOUS COMPONENTS COMPONENTS %WEIGHT TLV LD50 ORAL LC50 INHALATION LC50 CONTACT Lead (Pb, PbO, PbSO) 24 About 70% N/A (500) mg/Kg N/A N/A Sulfuric Acid About 20% 1 mg/m 3 (2.140) mg/Kg N/A N/A Fiberglass Separator About 5% N/A N/A N/A N/A ABS or PP About 5% N/A N/A N/A N/A SECTION 3: PHYSICAL DATA COMPONENTS DENSITY MELTING POINT SOLLUBILITY (H2O) ODOR APPEARANCE Lead 11.34 327.
PAGE 2
SECTION 5: FLAMMABILITY DATA COMPONENTS FLASHPOINT EXPLOSIVE LIMITS Lead None None Sulfuric Acid None None Hydrogen 259? Fiberglass Sep. N/A 478 Polystyrene None 4% - 74.2% COMMENTS Batteries can emit hydrogen only if over charged (float voltage> 2.4 VPC). The gas enters the air through the vent caps. To avoid the chance of a fire or explosion, keep sparks and other sources of ignition away from the battery. Extinguishing Media: Dry chemical, foam, CO 2. N/A Toxic vapors may be released.
PAGE 3
SECTION 7: CONTROL MEASURES 1. Store lead/acid batteries with adequate ventilation. Room ventilation is required for batteries utilized for standby power generation. Never recharge batteries in an unventilated, enclosed space. 2. Do not remove vent caps. Follow shipping and handling instructions that are applicable to the battery type. To avoid damage to terminals and seals, do not double-stack industrial batteries.
PAGE 4
SECTION 9: SULFURIC ACID PRECAUTIONS INHALATION: Acid mist may cause respiratory irritation. Remove any individual from exposure, and apply oxygen if breathing is difficult. SKIN CONTACT: Acid may cause irritation, burns or ulceration. Flush with plenty of soap and water, remove contaminated clothing, and see physician if contact area is large or if blisters form. EYE CONTACT: Acid may cause severe irritation, burns, cornea damage and blindness.