Submittal Sheet

2" Copper Manifold End Cap
Submittal Information
Revision B: Oct. 21, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: Type L Copper
Manifold Body Size: 2.0"
Maximum Working
Temperature/Pressure:
210°F at 150 psi
(99°C at 10 bar)
Maximum Temperature (no pressure): 320°F (160°C)
Product Information and Application Use
Use this large diameter Copper Manifold Spun End Cap to cap the
end of the Uponor 2" Copper Manifold for radiant heating projects.
It is designed to fit 2" copper piping. Tapings for ⅛" air vent and
½" drain are included.
9
Description
Part
Number
A B C D Weight
2" Copper End Cap Spun End with drain and
vent connections
A2402000 5.50" 3.90" ⅛" FIP ½" PTF-SAE
Short
1.0 lbs.
Installation
End cap sweats onto the Uponor 2" Copper Manifold. For more information, refer to the Radiant Floor Installation Handbook.
Standards
CSA B137.5; ASTM F877
Codes
N/A
Listings
NSF-rfh; ANSI/NSF 61-certified
Related Applications Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca