Submittal Sheet

TruFLOW™ End Cap with Vent and Drain
Submittal Information
Revision A: June 3, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: UNS C3850 Brass
Maximum Working Pressure: 145 psi
Maximum Temperature/Flow: 220°F (104°C)/21.0 gpm
Connection: 1¼" BSP
Product Information and Application Use
TruFLOW™ End Cap with Vent and Drain has 1¼" male BSP thread to connect into the
TruFLOW Classic Manifold Reducing Bushing supplied in the kit. This end cap comes
standard with a manual purge vent on top and a garden hose threaded connection on the
drain. Use Uponor Silicone Oil (A2620007) sold separately, on the male threads to ease
installation.
9
Description Part Number A B C Weight
TruFLOW End Cap with Vent and Drain A2621250 2.45" 4.97" 1¼" BSP 0.80 lbs.
Installation
The TruFLOW End Cap with Vent and Drain comes as an accessory already installed on the Uponor TruFLOW Classic Manifold. The Automatic
Vent with Check Valve is purchased as a separate accessory and installs on the top of the existing TruFLOW Classic Manifold End Cap with
Vent and Drain. Use Uponor Accessories: Replacement O-ring for 1¼" BSP Connections (A2620008); Silicone Oil (A2620007). Refer to the
Uponor Radiant Installation Handbook for additional information.
Standards
ASTM F877
Codes
N/A
Listings
NSF-rfh
Related Applications Contact Information
Radiant Heating and Cooling Systems
Permafrost Protection Systems
Snow and Ice Melting Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca