Submittal Sheet

Single-zone Pump Relay
Submittal Information
Revision A: May 15, 2008
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Transformer:
120VAC input, 24VAC (10VA rating)
Maximum Combined
Load: 7.2 A
Ambient Conditions: Indoor use only, 32°F (0°C) to 122°F
(50°C)
Product Information and Application Use
The Single-zone Pump Relay controls the operation of a single
circulator or pump from a 24-volt signal. The Single-zone Pump Relay
includes secondary low-voltage terminals for boiler operation.
9
Description
Part
Number
A B C Weight
Single-zone Pump Relay A3010100 4.25" 5.25" 2.75" 2.30 lbs.
Installation
Connect the thermostat to the “T T” terminals on the switching relay. When the thermostat calls for heat, the relay is energized and power is
given to the circulator. Refer to the Uponor Single-zone Pump Relay Instruction Sheet for additional information.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling Systems Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
655 Park Street
Regina, SK S4N 5N1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca