Submittal Sheet

Thermal Zone Valve
Submittal Information
Revision A: Feb. 10, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
Bronze casting, brass stainless-steel trim
Maximum Water Temperature:
248°F (120°C)
Maximum Working Pressure:
230 psi (1,585 kPa)
Gasket:
EPDM
Cv:
5.3
Spring:
Stainless steel
Connections:
¾" sweat; 1" sweat
Operating Voltage:
24VAC nominal, 1 watt
Time to Open/Close:
3 to 5 minutes
End Switch Rating:
24 VAC, 2 A Resistive
Product Information and Application Use
The Uponor Thermal Zone Valve, four-wire, features ¾" and 1" sweat
connections. It provides flow control for individual terminal units or a single-
zone manifold (manifold serving one zone). The Thermal Zone Valve is
assembled with the 1-watt Uponor Thermal Actuator, four-wire (A3023522)
which includes an end switch for activation of a relay pump, heat plant or
other auxiliary devices.
Part Number
Height Length
Width
Weight
A3011075
4.00" 2.50"
3.75"
1.75 lbs.
Installation
Refer to the Uponor Thermal Actuator Instruction Sheet for additional information.
Accessories
A2771060 Spacer Ring VA10 for White Thermal Actuators
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications
Contact Information
Uponor Radiant Heating and Cooling Systems
Uponor Snow and Ice Melting Systems
Uponor Permafrost Protection Systems
Uponor Turf Conditioning Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: 800.321.4739
Fax: 952.891.2008
www.uponorpro.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: 888.994.7726
Fax: 800.638.9517
www.uponorpro.com

Summary of content (1 pages)