Product Overview

Thermal Actuator
for radiant heating and cooling systems instruction sheet
The Uponor Thermal Actuator, four-wire (A3023522) features a low, 1-watt power consumption and includes three adapter
rings for compatibility with the following manifolds.
Thermal Actuator with adapter ring
Actuator mounting
Install the actuator verticallly or horizontally as shown above.
Note: The actuator is shipped locked partially open. To unlock, apply power for a minimum
of 6 minutes. Failure to do so will allow ow through the loops.
Actuator mounting
Vertical Vertical (inverted) Horizontal
Actuator mounting
Vertical Vertical (inverted) Horizontal
Actuator mounting
Vertical Vertical (inverted) Horizontal
Actuator installation
1. Thread the adapter ring
onto the valve.
Vertical Vertical (inverted) Horizontal
2. Place the actuator vertically
on the adapter ring.
3. Press down vertically and snap
the actuator onto the adapter ring.
A2671300 (EP Heating
Manifold Adapter Ring)
A2771060 (Stainless-steel
Manifold Adapter Ring)
A2870100 (TruFLOW
Manifold Adapter Ring)
Adapter rings
Engineered Polymer (EP)
Heating Manifold
Stainless-steel Manifold
TruFLOW™ Jr. Manifold
TruFLOW Classic Manifold

Summary of content (2 pages)